Drive SL CS 58D Carbon Wheelset – 58mm Disc Brake Carbon Wheel

Experience high-speed road performance with the Drive SL CS 58D Carbon Wheelset, a premium carbon wheelset engineered for riders who demand aerodynamic efficiency, low weight, high stiffness, and confident handling. Designed for modern road bikes, this carbon wheel combines a 58mm deep-section rim with ultra-light 3.2mm aero bladed carbon spokes, a one-piece titanium 60T freehub, and a 25mm internal rim width optimized for modern 29–32C road tyres.

The Drive SL CS series is designed to deliver an efficient balance between aerodynamics and real-world ride performance. The 58mm rim profile makes this drive wheel particularly suitable for flat roads, fast group rides, rolling terrain, and competitive road racing where maintaining speed is essential.

With a claimed wheelset weight of just 1350 ±30g, the Drive SL CS 58D is designed as a lightweight performance option without compromising structural strength. For riders searching for a lightest carbon wheel setup for road cycling, this wheelset offers a strong combination of low weight, aerodynamic design, and stiffness.

High-Performance Carbon Wheel for Modern Road Bikes

The Drive SL CS 58D carbon wheel features a 25mm internal hooked rim, designed around modern 700×29–32C tyres. The wider internal profile helps provide improved tyre support and cornering stability while allowing riders to run lower tyre pressures for improved comfort on longer rides.

Its front and rear asymmetric outer rim widths are engineered to balance aerodynamic performance with crosswind handling. The 58mm deep rim profile provides an aerodynamic advantage while the carbon-spoke construction helps maintain a high stiffness-to-weight ratio.

Whether you're upgrading your road bike for racing, fast group rides, or high-speed training, the Drive SL CS provides the performance characteristics expected from a modern premium carbon wheel.

Key Features

• 58mm Deep Carbon Rim – Aerodynamically optimized profile designed for fast road riding and racing.
• Lightweight 1350 ±30g Wheelset – Excellent balance between low weight, stiffness, and aerodynamic performance.
• 25mm Internal Rim Width – Optimized for modern 700×29–32C road tyres.
• 3.2mm SL Aero Bladed Carbon Spokes – Lightweight carbon spokes designed for aerodynamic efficiency and high lateral stiffness.
• One-Piece Titanium 60T Freehub – Provides approximately 6° engagement for quick and responsive power transfer.
• High Lateral Stiffness – Helps minimize wheel deformation during hard accelerations, sprinting, and cornering.
• Precision-Tuned Spoke Tension – Hub-side spoke-tension difference controlled to ≤7kgf for more consistent wheel performance.
• Wind-Tunnel Validated – Tested at the Silverstone Engineering Hub for aerodynamic performance and crosswind stability.
• UCI Approved – Suitable for UCI-regulated competitive racing.
• Hooked Rim Design – Compatible with clincher and tubeless-ready tyre setups.
• Wide Tyre Compatibility – Recommended for 700×29–32C tyres, with a compatible range up to 700×58C.
• Disc Brake Compatible – Center-Lock disc brake configuration.
• Thru-Axle Only – Designed for 12×100mm front and 12×142mm rear frames.
• TPI Steel Bearings – Designed for reliable operation across different weather and road conditions.
• Complete Factory-Fitted Accessories – Includes pre-installed rim tape, tubeless valves, spare carbon spokes, and alloy secure-lock nipples.
• 270 lb / 120kg Rider Weight Limit – Designed for riders up to the specified weight limit.

Aerodynamic 58mm Carbon Wheel Design

The Drive SL CS 58D uses a deep 58mm carbon rim profile to reduce aerodynamic drag and maintain speed efficiently. Its aerodynamic design has been validated through wind-tunnel testing, with testing performed at the Silverstone Engineering Hub.

The manufacturer states that the wheelset can provide a measurable 1–6W power advantage under typical 0–15° yaw-angle conditions, while maintaining crosswind stability at speeds of 28km/h and above.

This makes the 58D a suitable carbon wheel option for riders who spend considerable time riding at higher speeds on flat roads, rolling terrain, and fast group rides.

25mm Wide Internal Rim for Modern Tyres

The 25mm internal rim width is designed around today's wider road tyres. When paired with compatible 29–32C tyres, the wider internal profile helps provide better tyre sidewall support during hard cornering and high-power efforts.

The design also allows riders to use lower tyre pressures where appropriate, helping improve vibration damping and comfort over rough roads without giving up the aerodynamic benefits of a deep-section drive wheel.

One-Piece Titanium 60T Freehub

At the heart of the Drive SL CS wheelset is a one-piece titanium 60T ratchet freehub.

The ratchet teeth and freehub body are machined from a single titanium blank, providing approximately 6° engagement. This design is intended to provide quick engagement when accelerating and responsive power transfer when pedalling hard.

The titanium construction also provides strong corrosion resistance, while the TPI steel-bearing system is designed for practical long-term use and easier maintenance.

High Stiffness & Precision Spoke Tension

The Drive SL CS uses 3.2mm SL aero bladed carbon spokes designed to provide a high stiffness-to-weight ratio.

Hub-side spoke tension difference is controlled to ≤7kgf, helping create a more balanced spoke-tension distribution. This contributes to consistent wheel behavior under dynamic loads and helps reduce unwanted wheel deformation during hard efforts.

For competitive riders looking for a lightweight carbon wheel that remains responsive during acceleration, sprinting, and cornering, this combination of carbon spokes and precision-tuned spoke tension provides a performance-oriented setup.

48D-CS vs 58D-CS

The 48D-CS is designed as a versatile all-round option for riders who frequently encounter changing terrain and wind conditions. The 58D-CS uses a deeper 58mm profile for riders focused on higher-speed road riding, flat terrain, fast group rides, and competitive racing.

Drive SL 58D-CS Specifications

What's Included

• Drive SL 58D-CS Carbon Wheelset
• Pre-fitted Rim Tape
• Tubeless Valves
• 4 Spare Carbon Spokes
• Alloy Secure-Lock Nipples

Important Compatibility Information

The Drive SL CS wheelset is designed for thru-axle frames only:

• Front: 12×100mm
• Rear: 12×142mm

Quick-release frames are not compatible.

The CS version uses TPI steel bearings. The wheelset supports Shimano HG, SRAM XDR, and Shimano MSR 12S freehub bodies.